Furnace Repair Costs

A furnace tune-up can catch a lot of issues before they become major problems. A service technician can fix things like frayed or loose fan belts and clogged filters before they lead to expensive breakdowns.

If your breaker keeps flipping, it could be an ignition issue such as a malfunctioning flame sensor or dirty igniter. This is an easy fix when addressed immediately.


The cost of repairing your furnace depends on the type and severity of repair needed. Some repairs are relatively minor, such as a broken thermocouple or dirty flame sensor. Other repairs, such as a cracked heat exchanger or faulty blower motor, can be very costly. Whether the repairs are minor or major, a homeowner should weigh the total cost of the repair against the cost of replacement to decide which option makes the most sense for their situation.

The average cost of a furnace repair is around $150 to $250 depending on the type of repair needed. These costs include a service call, parts and labor. However, many homeowners can save money by investing in a preventative maintenance plan. This will help reduce the need for costly furnace repairs and improve overall system efficiency.

A squealing sound from your furnace may be caused by a loose or slipping belt on the blower motor. This can be fixed for an average of $135 to $325.

Other common repairs include a cracked heat exchanger ($800 to $1,500), a problem ignitor ($200), and a broken flue pipe (around $400). Cracked heat exchangers are dangerous because they allow carbon monoxide gas to be released into your home. This is why it’s important to hire a qualified technician to inspect your unit regularly for problems like this.

It is also worth noting that some common issues such as a dirty filter or indoor AC coils can be fixed by the homeowner themselves. However, it’s a good idea to contact a professional if you are having more complicated issues like difficulty starting the unit or the air coming out of the vents is cold and inconsistent.

Before starting any work on your furnace, it’s always a good idea to ensure the power is turned off. This can be done by either tripping the circuit breaker or removing the fuse that controls the power to the unit. It’s also important to be familiar with your thermostat, especially if it is digital, communicating or WIFI enabled.

If your unit is older and experiencing more frequent breakdowns, it might be time to consider replacing it with a new model. A new furnace will generally have a higher energy efficiency rating and lower utility bills than an old, inefficient one. A new furnace can save you up to $2,050 in energy costs over the life of the unit.

Repair vs. Replacement

Furnaces are made to last for years, and if you keep them maintained through regular replacement of air filters and regular maintenance visits, they’ll likely run for many years. Eventually, however, they’ll start to require more and more repairs and, at some point, will likely need to be replaced.

When it comes to making a repair or replacement decision, there are a few factors that can help you decide which route is best for your home. First, make sure your furnace is still under warranty. If it is, it’s a no-brainer: get the furnace repaired or replaced as soon as possible. In Furnace Repair Sandy Utah we may examine your system to see if any repairs could extend its life until you are ready to install a new furnace. If we cannot determine the type of heater you have or your fuel source, we can still build the right heating system for your home.  You may find out why countless of others have chosen our experts as their own furnace repair service by contacting us for an estimate. For further details, visit website.

You can tell if it’s time to repair or replace your furnace when you notice your energy costs are increasing, as this is usually a sign that your furnace is working harder than it should to keep your home warm. Another clear indicator is when your furnace starts making loud, high-pitched noises, which can indicate a number of issues such as a loose blower belt, a worn out motor or a clogged filter.

If you notice a yellow pilot light, it could mean carbon monoxide is leaking from your heat exchanger, which can be very dangerous. Also, if you find yourself frequently resetting your thermostat or changing the settings on a programmable model, it’s likely your system isn’t keeping up with your home’s heating needs and is struggling to stay efficient.

A new furnace offers the opportunity to upgrade your indoor air quality with humidity control, filtration and ventilation equipment. Talk to a service technician for advice on which equipment would be best for your home.


Furnaces are made to last many years, but they don’t keep working forever. If your furnace is exhibiting signs of wear and tear it may be time to call for a repair.

Unrepaired problems with a furnace can result in higher utility bills, frequent repairs and less comfort for the homeowner. Furnace Repair Sandy Utah can assess the condition of a furnace and provide guidance as to whether repair or replacement is the best course of action.

A good rule of thumb is that a furnace should be repaired when its efficiency drops by 10 percent or more. Furnace Repair Sandy Utah  can help you determine how much energy your furnace is wasting and recommend ways to improve efficiency.

One easy way to improve efficiency is by using a programmable thermostat. It can save you up to $1,500 a year in heating costs. Also make sure the air filter is clean. A dirty filter restricts airflow, strains the blower motor and reduces efficiency.

If you use gas, be sure to inspect the vent pipes on your furnace and water heater (while they are cool) to ensure there is no blockage. A clogged vent pipe can cause carbon monoxide to leak into your home, which is very dangerous. If you notice a burning smell or flu-like symptoms, leave the house and call a service technician immediately.

A clogged pilot light is another problem that needs immediate attention. It could lead to carbon monoxide poisoning, so it is important to get a professional to check it right away. Many newer systems don’t have a pilot light but instead use hot surface igniters that need to be kept free of dirt and debris for efficient operation.

A furnace should be inspected every year to make sure everything is working properly. It is also a good idea to have a preventive maintenance inspection done before the heating season begins. This will help prevent costly repairs and extend the life of your furnace. It will also reduce your energy bills and ensure that you are getting the most out of your system.


Modern furnaces are incredible machines. Twist a handle, clean, hot water flows forth; flick a switch, a warm room illuminates. But even these workhorses need a little attention, or they will suffer damage and fail. Regular maintenance checks catch problems early, and they can save you money in the long run.

The furnace produces heat by burning fuel, and it’s crucial that the combustion process is safe for your home’s occupants. Annual maintenance can catch problems like carbon monoxide leaks or other safety hazards that might not otherwise be apparent.

A well-maintained furnace also increases the longevity of the machine, and reduces maintenance costs. You won’t have to pay for repairs or replacement parts as often, and you’ll be able to keep the system running at peak performance.

In addition to preventing costly repairs, routine maintenance can help improve indoor air quality. Clean air filters keep out pollen, dust, and other allergens that can cause respiratory irritation. They can also reduce mold growth, which is a major health concern for many people.

Check the thermostat settings to make sure that it’s set to “Heat.” If you find that the setting is off or if it’s constantly changing from cool to hot, this is a sign of trouble. It’s also a good idea to keep the area around the furnace clear of debris like leaves, twigs, paper, and combustible materials. This will prevent a fire hazard and ensure that the ventilation systems are working properly.

Similarly, if you notice a strange smell coming from the vents or furnace, this could be an indication of a problem. It’s important to call for service right away if you notice this odor, as it can be a serious fire hazard and may indicate that the furnace is leaking dangerous carbon monoxide gas.

Before performing any type of maintenance on a furnace, it’s important to make sure that all power to the unit is off. This can be done by locating the breaker panel and checking that the fuse or circuit breaker for the furnace is removed or turned off.

A furnace tune-up can catch a lot of issues before they become major problems. A service technician can fix things like frayed or loose fan belts and clogged filters before they lead to expensive breakdowns. If your breaker keeps flipping, it could be an ignition issue such as a malfunctioning flame sensor or dirty igniter.…